Product Name | Where used | Platform | Protocol | Channels | From | To | RoHS | Short Description | |
---|---|---|---|---|---|---|---|---|---|
![]() |
CONA615-2 | RCEI-715A, RAR-EC | ARINC 615 Data Loader | ARINC | 4RX, 4TX | 615 Data Loader Cable Connector JT01RE-18A-53S | 603 Airborne Computer Connector MS24266R-18B-31P | No |
A 12" cable transitions from an ARINC 615 Data Loader Cable Connector (JT01RE-18A-53S) to an ARINC 603 Airborne Computer Connector (MS24266R-18B-31P) |
![]() |
CONA615-3 | RCEI-715A, RAR-EC | ARINC 615 Data Loader | ARINC | 4RX, 4TX | 615 Data Loader Cable Connector JT01RE-18A-53S | CMU-900 Connector DB25 Female | No |
A 12" cable transitions from an ARINC 615 Data Loader Cable Connector JT01RE-18A-53S to a CMU-900 Connector DB25 Female |
![]() |
COND25-1553 | IP-1553-STD, CEI-300, IP-708 | ISA | MIL-STD-1553 | 1 | DB25 male | Two male CJ70 jacks, two male BNC jacks | No |
Transitions from a 25 pin D-sub connector on a PC expansion card end-panel to two 8" cables with CJ70 Twinax, 3 lug, 1553 cable jack ends. |
![]() |
CONM50-D25-1 | IP-1553-STD, CEI-300, IP-708 | ISA | 708, MIL-STD-1553 | 1 | IDC 50 (0.1" center) female | DB25 female on end panel | No |
An 18" ribbon cable transitions from individual IP Module ribbon connectors on the ISA (PC/AT) carrier board to a 25 pin female D-sub connector mounted on a PC expansion card end-panel. |
![]() |
CONM50-D37 Cable | CEI-300, CEI-500, CEI-520A, IP-429HD, IP-CSDB, IP-717, IP-561A, CEI-520A, RCEI-530 Interface, RAR-PCIE Interface | PCI, PCIE, VME, ISA | ARINC, ARINC 429, ARINC 561, ARINC 573, CSDB | Up to 16RX, 16TX | IDC 50 (0.1" center) female | DB37 female on end panel | No |
A 15" ribbon cable transitions from individual IP modules on various carrier boards to a 37 pin D-sub female connector mounted on a PC expansion card end-panel. This allows external connection to pins 1-37 on an individual IP Module. The end- |
![]() |
CONM50-D37-30 | CEI-300, CEI-500, CEI-520A, IP-429HD, IP-CSDB, IP-717, IP-561A, CEI-520A, RCEI-530 Interface, RAR-PCIE Interface | PCI, PCIE, VME, ISA | ARINC, ARINC 429, ARINC 561, ARINC 573 | Up to 16RX, 16TX | IDC 50 (0.1" center) female | DB37 female on end panel | No |
A 30" ribbon cable transitions from individual IP modules on various carrier boards to a 37 pin D-sub female connector mounted on a PC expansion card end-panel. This allows external connection to pins 1-37 on an individual IP Module. |
![]() |
CONV1553-3 | IP-1553-STD, IP-D1553, IP-708, VME-1553, VME/VXI-MIO | VME, VXI | 708, MIL-STD-1553 | 1 | IDC 50 (0.1" center) female | Two male CJ70 jacks, two male BNC jacks | No |
An 18" cable assembly transitions from individual IP Module ribbon connectors on: VME and VXI front panels (or internal VME-AIC connectors) to two 8" cables with CJ70 Twinax, 3 lug, 1553 cable jack ends. |
![]() |
CONV1553-4 | IP-1553-STD, IP-D1553, IP-708, VME-1553, QVXI-1553X, VME/VXI-MIO, CEI-600 | VME, cPCI, VXI | 708, MIL-STD-1553 | 1 | SCSI-2 50 pin male | Two male CJ70 jacks, two male BNC jacks | No |
Transitions from each SCSI-2 connector on a VME, VXI or CEI-600-6 front panel to two 18" cables with CJ70 Twinax, 3 lug, 1553 cable jack ends. |
![]() |
CONV1553-5 | IP-708 | VXI | 708, MIL-STD-1553 | 1RX, 1TX | Low profile IDC-50 (0.1" center) female | Two male CJ70 jacks, two male BNC jacks | No |
An 18" cable assembly transitions from an IP-708 Module ribbon connector on the VXI-AIC to two 8" cables with CJ70 Twinax, 3 lug, 1553 cable jack ends. |
![]() |
CONV1553-6 | IP-D1553, VME/VXI-MIO | VME, cPCI, VXI | MIL-STD-1553 | 2 | SCSI-2 50 pin male | Four male CJ70 jacks, DB09 female | No |
Two channels of dual-redundant 1553. Transitions from each SCSI-2 connector on a VME, VXI or CEI-600-6 front panel to four 18" cables with CJ70 Twinax, 3 lug, 1553 cable jack ends, and D-Sub 9 pin connector for additional I/O. |
![]() |
CONW1553-1 | QVME-1553 Interface, QVXI-1553X, RQVME2-1553 Interface | VME, VXI | MIL-STD-1553 | 1 | DB15 male | Two male CJ70 jacks, four male BNC jacks | No |
Transitions from a card end connector (with IRIG) on the QVME-1553 or QVXI-1553X into two 8" cables with CJ70 Twinax, 3 lug, 1553 cable jack ends, and four 8" cables with BNC cable jacks for I/O triggers and IRIG Rec/Gen. |
![]() |
RCEI-715A | 429, 573, 575, 717, 568/582 6-wire, 582 2-wire, CSDB, 561/568/572 6-wire |
The RCEI-715A is an intelligent, high-density, Type II PC Card (PCMCIA) interface that provides up to 12 fully independent ARINC 429/575 channels, along with up to 4 bi-directional avionics-level I/O discretes. |
||||||
![]() |
RCONAF-EC | RAF-EC-2P Interface, BTP-AFDX Turnkey Analyzer | Express Card | AFDX/ARINC 664 | 2 | Card Edge champ 36 latching plug | One male HD-15, two RJ-45 shielded connectors | Yes |
A 6”cable transitions from the card edge connector on the RAF-EC-2P (champ 36) to one male HD-15 connector and two shielded RJ-45 connectors. |
![]() |
RCONCEI-620 | CEI-620, CEI-820, RAR-cPCI Interface, CEI-600 | PMC, cPCI | ARINC | Up to 16RX, 16TX | Champ (0.8 mm) 50 male (screw-lock) | DB50 male | Yes |
36" cable (with twisted pairs) transitions from a card end connector (P1 or P2) on the CEI-620, CEI-820 or RAR-cPCI to a 50 pin D-sub male connector. |
![]() |
RCONM50-D25-2 | IP-1553-STD, IP-D1553, CEI-500, PCI-1553 | PCI | MIL-STD-1553 | 1 | IDC 50 (0.1" center) female | DB25 female on end panel | Yes |
An 18" ribbon cable transitions from individual IP Module ribbon connectors on the PCI carrier board to a 25 pin female D-sub connector mounted on a PC expansion card end-panel. |
![]() |
RCONP1553-1 | PCI-1553, ISA-1553, VME-1553, QVME-1553 Interface, RQVME2-1553 Interface, QVXI-1553X | PCI, VME, ISA, VXI | MIL-STD-1553 | 1 | DB15 male | Two male CJ70 jacks, two male BNC jacks | Yes |
Transitions from each card end (non-IRIG) connector on various boards into two 8" cables with CJ70 Twinax, 3 lug, 1553 cable jack ends, and two 8" cables with BNC cable jacks for I/O triggers. |
![]() |
RCONPMC-708 | RP-708 Interface | PMC | 708, MIL-STD-1553 | 1 | SCSI-3 68 Pin male | Two CJ70 jacks | Yes |
Transitions from the RP-708 card-end connector into two cables with CJ70 Twinax, 3 lug, 1553 cable jack ends for transformer coupling. |
![]() |
RCONQPMC-1 | QPMC-1553 Interface, QPCI-1553 Interface, QCP-1553 Interface, QPM-1553 Interface, QPCX-1553, RPCIE-1553 Interface, RXMC1553 Interface | PCI, PCIE, PMC, XMC, cPCI | MIL-STD-1553 | 1 | SCSI-3 68 Pin male | Two CJ70 jacks, DB50 female | Yes |
Transitions from a SCSI-68 pin connector to two CJ70 Twinax, 3 lug, 1553 cable jack ends and one D-Sub 50 pin connector for additional I/O. |
![]() |
RCONQPMC-2 | QPMC-1553 Interface, QPCI-1553 Interface, QCP-1553 Interface, QPM-1553 Interface, QPCX-1553, RPCIE-1553 Interface, RXMC1553 Interface | PCI, PCIE, PMC, XMC, cPCI | MIL-STD-1553 | 2 | SCSI-3 68 Pin male | Four CJ70 jacks, DB50 female | Yes |
Transitions from a SCSI-68 pin connector to four CJ70 Twinax, 3 lug, 1553 cable jack ends and one D-Sub 50 pin connector for additional I/O. |
![]() |
RCONQPMC-4 | QPMC-1553 Interface, QPCI-1553 Interface, QCP-1553 Interface, QPM-1553 Interface, QPCX-1553, RPCIE-1553 Interface | PCI, PCIE, PMC, cPCI | MIL-STD-1553 | 4 | SCSI-3 68 Pin male | Eight CJ70 jacks, DB50 female | Yes |
Transitions from a SCSI-68 pin connector to eight CJ70 Twinax, 3 lug, 1553 cable jack ends and one D-Sub 50 pin connector for additional I/O. |
![]() |
RCONSCSI3-6 | RAR-USB Interface, RAR-XMC Interface, RAR-PCIE Interface, RCEI-530 Interface, RCEI-830A Interface, CEI-520A, R830RX-32 Interface, MAC2-VXI Interface, RMAC-VME Interface, P-DIS Interface, P-SER Interface | SCSI-3 68-pin male | SCSI-3 68-pin male | Yes |
72" cable (with twisted pairs) transitions from the card front panel I/O connector on the CEI-520/520A, RCEI-530, RCEI-830A, R830RX or P-SER to a SCSI-3 connector. |
|||
![]() |
RPCC-D1553 Interface | 1, 2 |
The RPCC-D1553 provides the highest level of performance and density for MIL-STD-1553A/B in a Type II PCMCIA (PC Card) form factor. |
CABLES products that are No Longer Recomended or Discontinued see below.
Product Name | Body |
---|---|
CONC1553-1 |
Transitions from a Champ 50 connector on the front panel to two 18" cables with CJ70 Twinax, 3 lug, 1553 cable jack ends. |
CONCEI-220 |
20" ribbon cable transitions from the rear (P4) connector on the CEI-220 to a 37 pin D-sub male connector mounted on a PC expansion card end-panel. |
CONP10SF |
Transitions from a SCSI-68 pin connector to to a 15 pin D-sub female connector and four RJ-45 shielded connectors. |
CONPMC-708 |
Transitions from the RP-708 card-end connector into two cables with CJ70 Twinax, 3 lug, 1553 cable jack ends for transformer coupling. |
Abaco provides extensive, in-depth support to avionics designers with a broad and deep line of avionics interfaces, test platforms, tools and software.