Digital and Serial I/O

CP-6201 provides 16 high-performance asynchronous EIA-232 serial channels on a single 6U CPCI board.

EPMCQ2, a member of the EmPower™ family, is a PowerQUICC II-based PMC providing a cost-effective solution for applications requiring multiple high-speed serial communications interfaces.

High speed serial interface in a a PMC form factor.

IndustryPack with 48 TTL level tristate digital I/O lines with pullups, interrupts, debounce and ESD.

IP-MP-SERIAL is a single-wide, Type II IndustryPack that implements two EIA-232/422/485 high-speed, multi-protocol serial ports, each with a full set of handshake and clock signals.

IP-OCTAL-422 is a single-wide IndustryPack that implements eight EIA-422 asynchronous serial ports, each with RXD and TXD balanced pair signals.

IndustryPack with 8 digital optically isolated inputs and 8 optically isolated output

Single-wide IndustryPack with 8 form C latching relays.

The IP-UD-D differential digital I/O IndustryPack provides 24 flexible I/O signal lines with differential output drivers and differential inputs.

IP-UD-E-48 is a single-wide IndustryPack that provides 48 flexible I/O lines with TTL-level inputs and outputs.

The IP-UD-ID differential digital I/O IndustryPack provides 24 flexible input/output lines with differential output drivers and differential inputs.

The IP-UD-IHV-16I8O IndustryPack provides high voltage, 16 inputs, 8 outputs, and interrupts.

P1-IO32 Type I PC-MIP modules provide 32 digital lines.

P1-OCTAL422 Type I PC-MIP modules provide eight EIA-422 channels of asynchronous serial communication channels.

P2-HSS2 provides 4 high-speed synchronous serial channels.

P2-OCTAL2322 provides eight channels of EIA-232 asynchronous serial communication on a Type II PC-MIP module.

PIO-2 is a 6U VME card that enables any VME-based system to interface easily with the real world. It provides an optimized and very flexible connection arrangement between the VMEbus and a wide range of external sensors and actuators.

The PMC-3211-24F provides up to four synchronous or asynchronous full duplex serial ports, based on the Zilog Z85230 Enhanced Serial Communications Controller (ESCC).

PMC422/FP 8-port Serial, 4 ports with RJ45 connectors front or 8 ports rear

PMC with 16 inputs, 16 outputs, optically isolated 24V with interrupts, debounce, extended temperature range, and rear I/O.

PMC with 32 opto-isolated high side switches with 24V, 0.5A capacity, watchdog timer, extended temperature range, and rear I/O.

Single-wide PMC with four channels of high-speed asynchronous or synchronous serial and both front and rear I/O.

PMC providing 32 optically isolated 24V inputs with debounce, extended temperature, and rear I/O.

Expands eight high-performance asynchronous RS-232 serial channels to a PCI Mezzanine Card (PMC)

PMC providing 4 channels of opto-isolated asynchronous RS232 115 kbaud serial interface with FIFOs, ESD protection, extended temperature range, and both front panel I/O and P14 rear I/O.

PMC with 16 channels of asynchronous RS232 115 kbaud with FIFOs, ESD protection, and front panel I/O and P14 rear I/O.

PMC421 Intelligent Serial, 8 Ports, front or Rear I/O

The PMC477 provides a uniquely effective solution for integrating serial I/O requirements into a VMEbus or cPCI system.

PMC682 Multiprotocol Connectivity, one 10/100BaseTX Ethernet, two Serial ports

PMC682J4 Multiprotocol Connectivity, one 10/100BaseTX Ethernet, two Serial ports, Rear I/O

PMC684 Multiprotocol Connectivity, four 10/100BaseTX ports, four Serial Ports, one Modem, 16 I/O, Rear I/O

PMCQ1 is PMC that provides high speed serial communication capabilities plus an optional MIL-STD-1553 interface. It is available in five ruggedization levels.

64-bit high voltage digital input board with Built-In-Test

Optically Coupled Digital Input with Change-of-State Interrupts

32-bit Optically Isolated Change-of-State (COS) Input Board with Sequence-of-Events (SOE)

VME-2131 64-bit High-Current Source/Sink Driver Board

64-bit TTL Digital I/O with Built-In-Test

32-bit High-Voltage Digital Input and/or Output Board with P2 I/O and Built-in-Test

VME-6015 Quad-Serial Input/Output Interface Board

The XM-1553 is a passive transition module for IP-1553 IndustryPacks.