All Condor ARINC products are tolerant of momentary shorting of the "+" to "-" terminals. That is, if the Tx+ wire...
Our product names are related to the protocol the board runs on, not the specific type of data the board can transmit...
Share
Condor uses a reliability analysis software design tool which employs modelling based upon MIL-HDBK-217. This package...
Share
Both the CEI-520 and the CEI-520A require 5V, +12V, and -12V. These voltages are mandated by the PCI specification, as...
Share
The CEI-520A requires CEI-x20-SW version 3.80 or higher. If version 3.80 or higher is already installed, contact GE...
Share
First, make sure that version 3.80 or later of the CEI-x20-SW distribution is installed (see M-INFO-90220 below for...
Share
The CEI-520A is functionally compatible with the CEI-520. There has been a slight change to the PCI host interface...
Share
BusTools/1553-API does not support hardware interrupts for the PCCCARD-1553, because the PCMCIA driver has no interrupt...
Share
Cause: Under WDM (Windows 2000/XP), Condor PCI/cPCI/PMC devices are enumerated at boot-time and assigned a unique device...
Share
If you are using a 1553 board and are physically on the aircraft, then both ends of the 1553 bus should be grounded to...