Since Windows NT is not a full real-time system, there are things taking place below the surface. This obviously...

The PCI-1553-MM board has two independent 1553 interface channels. When you program the board using the BusTools/1553...

To properly run the internal self test for all supported hardware, start with a clean file configuration (create a new...

This problem is related to your system setup. With a CEI-520 and PCI-1553 card installed on the same system running...

Scheduled transmissions are not adversely affected by calling AR_MODIFY_MSG at a higher frequency than the transmission...

This problem may result when: the external bus isn't enabled in the API, or you're using the bus in the direct coupled...

Once you've defined a message using AR_DEFINE_MSG, the unique message ID returned remains valid until AR_INIT_DUAL_PORT...

This issue is related to BUS MONITOR setup. If you have performed minimum bus monitor setup, with very few monitor...

The PA-100 needs a minimum time delay of 100ms between the time the PA-100 command to change the baud rate is sent and...

There may be devices that are installed on the computer that reserve the COM port. Check the Device Manager for any...