RM677RC

RM677RC is a fiber connected PCI edge card designed to offer 1000Mbit Ethernet connectivity. Using 1000BaseSX (1000BaseLX optional), the RM677RC is capable of full duplex operation. The Ethernet/PCI interface includes a powerful DMA engine with 64KB deep FIFO buffers. This assures continuous, full bandwidth operation with minimum PCI overhead. The RM677RC has LC connectors. A mix of SX and LX is possible in any combination. RM677RC has a rich suite of host off-loading feature including: Packet filtering based on checksum errors; SNMP and RMON statistic counters; Hardware TCP checksum off-loading; and Support for various address filtering modes such as 16 exact matches (unicast or multicast), 4096-bit hash filter for multicast frames and Promiscuous unicast and multicast. Two RM677RC boards can be directly cabled with a simple "cross-over". This configuration creates a full duplex 1000Mbit dedicated data path (for each port) - delivering high bandwidth at very low cost. More complex, dedicated interconnects can be created using a hub or switch. Both point-to-point and switched hubs, in full duplex mode, remove many determinism concerns raised with traditional Ethernet solutions. This makes the RM677RC an excellent candidate for high performance interconnects that require real time determinism. Software drivers are available for all the popular operating systems (e.g. VxWorks, HPUX, LynxOS, Digital UNIX, Windows NT, Solaris etc.). These drivers have been carefully designed and implemented to fit within the LAN protocol stack of the host operating system. All facilities available from the host OS can be used across the RM677RC.

• 1000BaseLX optional
• Interchangeable, pluggable transceivers
• Jumbo Frames capable
• DMA engine
• LC connector
• Full 1000Mbit point to point performance
• Quad 1000BaseSX Ethernet ports
• PCI-X, PCI 64-bit/66MHz
• RoHS compliant
• Acrylic or polyurethane conformal coating optional
• Ethernet/LAN Resource Center